Full Freeview on the Fenham (Newcastle Upon Tyne, England) transmitter
Google map | Bing map | Google Earth | 54.977,-1.664 or 54°58'39"N 1°39'51"W | NE15 6PL |
The symbol shows the location of the Fenham (Newcastle Upon Tyne, England) transmitter which serves 34,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Fenham transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Fenham transmitter?

BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 3km east-southeast (108°)
to BBC North East and Cumbria region - 70 masts.

ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 2km south-southwest (207°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
How will the Fenham (Newcastle Upon Tyne, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | |||||
A K T | W T | W T | A K T | A K T | |||||
C21 | BBC1waves | BBC1waves | BBC1waves | +BBCB | |||||
C22 | +ArqA | ArqA | |||||||
C23 | BBCA | ||||||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | |||||
C25 | SDN | SDN | |||||||
C26 | D3+4 | ||||||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | |||||
C28 | ArqB | ArqB | |||||||
C30 | _local | BBCB | |||||||
C31 | C4waves | C4waves | C4waves | com7 | |||||
C36 | _local | ||||||||
C37 | com8 | ||||||||
C56tv_off | C5waves | C5waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 2kW | |
SDN, ARQA, ARQB, com7, com8, BBCA, D3+4, BBCB | (-7dB) 400W | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-17dB) 40W | |
Mux C*, Mux D* | (-20dB) 20W |
Local transmitter maps
Fenham Freeview Fenham DAB Pontop Pike TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Pontop Pike transmitter area
|
|
Tuesday, 7 November 2017
Transmitter engineering
4:31 AM
4:31 AM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 10:04 yesterday to 14:33 yesterday. [BBC]
link to this comment |
Transmitter engineering
2:09 PM
2:09 PM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 10:05 today. [BBC]
link to this comment |
Transmitter engineering
8:09 PM
8:09 PM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 10:05 today to 13:51 today. [BBC]
link to this comment |
Wednesday, 8 November 2017
Transmitter engineering
5:09 AM
5:09 AM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 10:05 yesterday to 13:51 yesterday. [BBC]
link to this comment |
Thursday, 9 November 2017
Transmitter engineering
5:09 AM
5:09 AM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 10:05 on 07 Nov to 13:51 on 07 Nov. [BBC]
link to this comment |
Monday, 18 December 2017
P
Paul McDonnell3:43 PM
I'm having problem with my Panasonic PVRs (I have three). Certain channels won't record or pause, specifically on HD, 106-113, 115 and 205. Looking at your transmitter info for Fenham, Mux Com 7 looked to be the culprit, so I tested some of the SD channels, and had the same problem. On trying to pause live TV I get a message saying "No signal for operation". On trying to record, the recording never starts. This has been going on for a few weeks now. As far as I am aware, other channels not on Mux Com 7 are all fine.
On advice from Panasonic, I did a "dry" retune. It made no difference. I've lost count of how many times I've reset the unit. My postcode is NE82EE if needed.
Any suggestions what I should do about this?
link to this comment |
M
MikeB9:30 PM
Paul McDonnell: Have you checked the strength/quality of the various muxes?
The machine is telling you that its not getting enough of a signal, so you need to check if you are getting the correct transmitter. My old Sony PVR, which had, like Panasonics, a pretty sensitive tuner, would bring in other transmitters just enough to fool the PVR, but not enough to actually record anything.
If its locked into another transmitter, you can kill the signal a bit. or retune if it s just a one off.
The second possibility is that the transmitter is spot on, but your system is not. If your losing muxes, thats a classic sign of a system problem, perhaps via lose connections, dodgy cable, etc.
Since you have 3 Panasonics (I assume the 7/8 series), it sounds like the latter problem - so I'd start looking at the point where the signal splits.
link to this comment |
Tuesday, 10 April 2018
Transmitter engineering
3:07 PM
3:07 PM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 13:41 today. [BBC]
link to this comment |
Transmitter engineering
6:07 PM
6:07 PM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 13:41 today to 14:45 today. [BBC]
link to this comment |
Wednesday, 11 April 2018
Transmitter engineering
6:07 AM
6:07 AM
FENHAM transmitter - DAB: BBC National DAB Radio Weak Signal from 13:41 yesterday to 14:45 yesterday. [BBC]
link to this comment |
Select more comments
Your comment please