Fenton transmitter - retune required on 20th April 2011
Just a quick reminder to the 130,000 homes that use Fenton there is a frequency change from 20th April 2011 until 21st September 2011, Multiplex 2 will operate on C33 at 100W (from original C30).
If you use this transmitter, you will need to retune at around 6am.
You will need to do a "first time installation" to clear the existing scanned channels from your list, otherwise you will find all the moved channels in the 800-899 range.
This should cause no problems, but if you find the channels are missing after 6am, please check for Single frequency interference.